HOW DO I REMOVE CURED RESIDUES OF ARALDITE ?
For Araldite Super Glue: residues can be removed using warm water and soap water.
For Araldite Epoxy adhesives:
Cured residue or exuded adhesive may be destroyed by immersion in commercial paint strippers, such as Nitromors or Multistrip, and these are available from most retail paint suppliers. Joints may be broken by soaking in these chemicals for periods up to 24 hours depending on the joint width and thickness. Details for use and safe handling of paint strippers should be obtained from the manufacturers.
NOTE : Care should be taken in using the chemicals given above since they may be hazardous to handle or inflammable, and may also attack the substrate.
my concern was this could be OK on hard surfaces, but the ole dash is not hard.
think I will try Citroënbender second idea, just hope he has not forgotten something else
