View Single Post
Old 30-06-2020, 08:07 PM   #5
TeamSAXON
Regular Member
 
TeamSAXON's Avatar
 
Join Date: Apr 2015
Posts: 51
Default Re: Replacing antenna assembly

Quote:
Originally Posted by foxtrot3 View Post
Run the red and the green wires to the radio and using the memory wire provide a feed for the red wire and use the blue wire from an aftermarket radio or the red/blue antenna trigger wire from the factory radio (check with a test light) to the green wire on the antenna. ...PS: never seen a factory power antenna that didn't take an ap12 there was another antenna that replaced the factory full auto unit that is NLA, it might pay to ring around and see if anyone has some old stock. Cheers

Where would one find the memory wire and factory red/blue trigger wire? Are they a part of the the wires running out of the headunit? .. As the old plug which was connected to the factory antenna wires (red and green) has green/yellow (power) and red/white (unsure?)

The motor on the ap5 is not making any noise when I tested it on a battery
__________________
Current daily:
AUIII XR6 Silhouette 164kW
Sedan
383xxx kms

Previous drives:
AUII XR6 Silhouette 172kW VCT sedan 256xxxkms
AUIII ForteWinter White 157kW sedan 201xxxkms
TeamSAXON is offline   Reply With Quote