Re: P2176 and EAC in Dash
|
|
Not sure about the throttle body??
I had been told the resistance of the motor should of been 7.3ohms but tested both and found they were both 1.8-1.9ohms so shouldn't really have been an issue and highly unlikely you get 2 with the same fault.
Yes short term fuel trim looking better and hopefully after a good drivevthey will improve too as the downstream 02 sensor still seemed rich but I put that down to the running rich and hopefully that will come good after a good run.
LTFT couldn't find on the Forscan but will try with another scanner on Tuesday (wheel bearing to do) and see what they are. By that time it will have done 80kms on the highway so should of settled down a bit.
Thanks again for your help much appreciated 😎
|