Re: Replacing power antenna on Auiii xr6
|
|
Quote:
Originally Posted by foxtrot3
Hi. It could be 2 things, a bent mast, that you can check for by setting the antenna to half way and seeing if each section slides into the one below it by manually pushing and pulling the sections up and down or it has had a broken cable inside the mast and someone has fitted a new mast & cable without taking out the broken 3 inch bit in the bottom of the antenna. This lets the new mast retract until there is no room for the cable to store in the housing and the antenna retracts no further. If it is a bent mast ,Aerpro do a replacement mast & cable (AP12 Mast and cable) that should fit. The complete antenna (AP3) is no longer available from aerpro. Cheers MD
|
Thanks a lot mate. Looks like I’ll be pulling it apart!
__________________
2022 RAM Laramie 5.7 V8 Here & awesome!
2023.50 Ranger Wildtrak 3.0 Premium Pack, 20 inch wheels.
2024 Everest Sport 3.0 V6 Touring Pack
|