![]() |
|
![]() |
#1 | ||
Starter Motor
Join Date: Oct 2006
Posts: 4
|
G'Day, I have an 87 KC Laser that is running rough and is gutless. I have changed plugs, leads, distributor cap and rotor arm. I have also stripped down and cleaned the carby. Has anyone got any ideas. Thanks.
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
have to wait for vippin's input
might be a valve burnt or low compression whats the compression figures if electroninc the coil or dissy module if injected buy new injectors or injector clean
__________________
My car goes Brumm Brumm |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Starter Motor
Join Date: Oct 2006
Posts: 4
|
I hav'nt done any compression testing yet, but i am starting to think along the lines of a valve or a piston.
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
What a performer!
Join Date: Jul 2005
Location: SA, Northern Suburbs
Posts: 599
|
Yeah can't be too precise on that, might be an idea to get it looked at if you've done all the general things.
__________________
1981 Ford Laser KA :: E5 :: 2002-2003 1989 Ford Laser KE TX3 :: BP :: 2003-2007 75fwkW 1990 Ford Laser KF TX3 :: BP :: 2010-2011 1991 Ford Laser KF TX3 :: BP-T :: 2011-2015 109fwkW 2007 Ford Falcon BF XR6 Turbo Ute :: Barra 245T :: 2014-2019 324rwkW 1998 Ford Falcon AU XR8 Ute :: Windsor V8 :: 2019-2020 2008 Ford Fiesta XR4 :: Duratec 150 :: 2021-* 1998 Ford Falcon AU XR6 :: HP Intech :: 2021-* |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
a vaccume leak
check all the vaccume lines vaccume advance throttle body and anti pollution air flow meter , o2 sensor, or even a clogged catalytic converter
__________________
My car goes Brumm Brumm |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
Starter Motor
Join Date: Oct 2006
Posts: 4
|
Dirty Hands, I'll give all those things you mentioned a check at the weekend. Thanks
|
||
![]() |
![]() ![]() |
![]() |
#7 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
Vippin knows more about lasers post up the figures and what you find
you can be sure to get help in here ....to get your car to run better
__________________
My car goes Brumm Brumm |
||
![]() |
![]() ![]() |
![]() |
#8 | ||
Regular Member
Join Date: Jan 2007
Posts: 51
|
Have you given it an oil change. sometimes the oil gets too gluggy to pump up to the overhead cams?
|
||
![]() |
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|