|
29-09-2007, 06:36 PM | #2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
general procedure to take out a FWD auto
get a good one from a wrecker undo outer cv nut - large socket and lever bar have someones foot on the brake pedal or in gear or park jack up car put on stands undo both front wheels drain auto oil /remove both drive shafts by undoing tie rods and front lower shock strut nuts undo battery and starter / gear cables /wiring to the box /undo drive plate nuts to torque converter might be a plate at the end of the sump to remove undo rest of gearbox nuts held to motor lower gearbox with a jack make sure the torque converter is in the box properly
__________________
My car goes Brumm Brumm |
||