|
12-04-2013, 11:11 PM | #1 | ||
Regular Member
Join Date: Aug 2007
Posts: 55
|
I have just started a power window upgrade in my ute and need some help with the wiring, I don't have power (12v) to the relay (pin 85), now I have a parts car which I'm using and when I traced it I found it comes out of the blue plug (back of fuse panel) which then goes to the BCM is this right or did I stuff up? If I'm right how do I get around it, I would like to use the fuse panel for the relay if I can?
Thanks |
||
14-04-2013, 03:15 PM | #2 | ||
Got Ghia?
Join Date: Jul 2006
Location: Perth
Posts: 999
|
Traditionally Pin 85 is earth.
Colours according to manual (if you trust that!) Power to pins 86 and 30 from 30amp C/B in fuse box. Brown/pink wire to BCM from 85 Grey/yellow from 87 off to your power window switches
__________________
2007 BF MKII Ghia V8 - BA GT Exhaust| F6 Intake | Superlows | 19" GT-P's | 30mm Swaybar | - Sold 2002 AU2 XR8 Ute - Manual | Leather | Injected LPG | Pacemakers |
||
14-04-2013, 09:16 PM | #3 | ||
Regular Member
Join Date: Aug 2007
Posts: 55
|
Thanks Gav
Will need to check it out tomorrow But if I run a wire to the BCM will I need to take it to ford to be reprogrammed? |
||
15-04-2013, 09:00 PM | #4 | ||
Got Ghia?
Join Date: Jul 2006
Location: Perth
Posts: 999
|
I don't think you can just run a wire to the BEM, you'd need a BEM that has power window control.
In _theory_ you should just be able to earth pin 85 and the windows will work, but you won't get any of the controls the BEM offers, however I have not checked what the exact BEM funtions for the power windows is on the AU.
__________________
2007 BF MKII Ghia V8 - BA GT Exhaust| F6 Intake | Superlows | 19" GT-P's | 30mm Swaybar | - Sold 2002 AU2 XR8 Ute - Manual | Leather | Injected LPG | Pacemakers |
||
16-04-2013, 09:13 AM | #5 | ||
Regular Member
Join Date: Aug 2007
Posts: 55
|
I spoke to an auto electrician yesterday and he said the same, just earth it, so I have them working
|
||