Power windows

[speed d8r]

I have just started a power window upgrade in my ute and need some help with the wiring, I don't have power (12v) to the relay (pin 85), now I have a parts car which I'm using and when I traced it I found it comes out of the blue plug (back of fuse panel) which then goes to the BCM is this right or did I stuff up? If I'm right how do I get around it, I would like to use the fuse panel for the relay if I can?

Thanks

[Gaz]

Traditionally Pin 85 is earth.

Colours according to manual (if you trust that!)

Power to pins 86 and 30 from 30amp C/B in fuse box.
Brown/pink wire to BCM from 85
Grey/yellow from 87 off to your power window switches

[speed d8r]

Thanks Gav

Will need to check it out tomorrow

But if I run a wire to the BCM will I need to take it to ford to be reprogrammed?

[Gaz]

I don't think you can just run a wire to the BEM, you'd need a BEM that has power window control.

In _theory_ you should just be able to earth pin 85 and the windows will work, but you won't get any of the controls the BEM offers, however I have not checked what the exact BEM funtions for the power windows is on the AU.

[speed d8r]

I spoke to an auto electrician yesterday and he said the same, just earth it, so I have them working