|
27-04-2005, 11:42 PM | #1 | ||
Zetec Screamer....
Join Date: Jan 2005
Location: Coogee, WA
Posts: 190
|
Just want to know who here has fitted King Springs on their focus. Got a good price to on a set and just wanted to know what some of youz out there that have em fitted think of them.
cheers Tom |
||
28-04-2005, 04:36 PM | #2 | ||
Regular Member
Join Date: Jan 2005
Location: Narre Warren, Vic
Posts: 207
|
I've got king spring super lows on my beast, it droped to just over legal, but with the super lows i was expexting more, i find that my rear end has become abit bouncy, and overall has stiffend up heaps, there not bad better for cornering cos theres less roll, so yeah there not to bad, eibachs are probly better but r more $$$
James |
||
28-04-2005, 04:45 PM | #3 | ||
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
I have no complaints with stock ride height, feels fine to me and doesnt look as bad as i thought, however if i lower it id be using Pedders Springs (assuming they make some for it) and Koni shocks. If im going to do it I may as well do it properly.
__________________
RAM 1500
|
||
28-04-2005, 04:56 PM | #4 | ||
Regular Member
Join Date: Jan 2005
Location: Narre Warren, Vic
Posts: 207
|
pedders do springs for the focus, drops to roughly the same as mine, yeah should have got monroe shocks at the least when i did mine but the money factor......
|
||
10-05-2005, 09:40 AM | #5 | ||
Starter Motor
Join Date: May 2005
Posts: 11
|
I have King Spring super lows on my 2003 zetec. There is far less body roll than the stock springs. I have kept the stock shockers and have had no problems.
The only problem I have had is with a bit of tyre scraping on the front when wheels are on full lock left or right. |
||