|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
26-04-2007, 08:22 PM
|
#1 | ||
|
Spin 'em Habib !
Join Date: Jul 2005
Location: Cranbourne Victoria
Posts: 3,854
|
Does the Plastic Trim above the Airbag on the Passenger side come off ?
__________________
AU2PWR |
||
|
|
|
26-04-2007, 08:34 PM
|
#2 | |||
|
Blown 5L coming
Join Date: Dec 2006
Location: Warwick, QLD
Posts: 1,997
|
the trim you talk about is the spear im assuming, and yes it does come off, as to how, i wouldnt be 100% sure i think there is a couple of bolts, maybe otherwise it would be a couple of clips.
__________________
1995 EF Fairmont was stocko 6cyl with open single spin diff....NOW WITH XR8 ENGINE, DRIVELINE AND SUSPENSION!!!!! Maybe by the end of 2010 there may just be a blower as well ;) NEW CLUB FOR SUNSHINE COAST !! www.f-p-e.proboards.com Contact Col (au2sw) via PM or on MSN @ efmonty@hotmail.com Quote:
|
|||
|
|
|
|
26-04-2007, 08:35 PM
|
#3 | ||
|
FTF Club Moderator
Join Date: Jan 2005
Location: Driving my Tickford T3 Wagon in Sydney
Posts: 3,132
|
It does come off. In order to get to it you need to take the airbag out and you will see the screws holding it in IIRC.
__________________
Albert Einstein: Es ist schwieriger, eine vorgefaßte Meinung zu zertrümmern als ein Atom. (It is more difficult to alter a preconception than split an atom) Falcon Tickford FPV (FTF) Car Club of NSW Fords in the Park 2010 I use and recommend Stingray Car Security. http://www.stingraycar.com.au/ |
||
|
|
|
|
26-04-2007, 08:46 PM
|
#4 | ||
|
Spin 'em Habib !
Join Date: Jul 2005
Location: Cranbourne Victoria
Posts: 3,854
|
meh , Screw that .. excuse the pun
__________________
AU2PWR |
||
|
|
|
|
26-04-2007, 08:55 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 1,463
|
If you plan on removing the airbag cover first check if it has the break upon removal clips which cannot be reused, unless you are lucky.
|
||
|
|
|
|
26-04-2007, 09:33 PM
|
#6 | ||
|
CRE.87V
Join Date: Jan 2006
Location: Newcastle
Posts: 388
|
u need to pull out the air bag..get flat blade screw driver and pry bottom out...these are one way clips....they are bout 10 bucks to replace from ford....there are 4 or 5 10 mm nuts...undo these then it will pretty well fall out
|
||
|
|
|
|
26-04-2007, 09:34 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2005
Location: Melbourne
Posts: 587
|
How about if you don't have a airbag there.... whats under it?
|
||
|
|
|
|
27-04-2007, 12:14 AM
|
#8 | |||
|
FF.Com.Au Hardcore
Join Date: Apr 2006
Location: Australia
Posts: 1,452
|
Quote:
|
|||
|
|
|
|
27-04-2007, 02:27 AM
|
#9 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2005
Location: Melbourne
Posts: 587
|
Don't worry bout the passenger i want a TV too,
 :Wouldn't be a bad place to put some gauges. |
||
|
|
|
|
27-04-2007, 11:25 AM
|
#10 | |||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Posts: 556
|
Quote:
|
|||
|
|
|
|
27-04-2007, 12:09 PM
|
#11 | ||
|
Built Ford Tough
Join Date: Jan 2005
Location: State of Euphoria Mod: F-Series
Posts: 3,035
|
The way to access those bolts, without removing the airbag, involves removing the center console, and cover to the side of the dash, and using a long arm. It's not recommended though, and if you try that like me and drop a nut, you end up removing the airbag anyway...
Dunno about those clips being $10 though. I bought 8 (in case I had to do the job again) and it was lucky to be a couple of $$.
__________________
Black on white '83 SWB F100 C6 auto 351C on gas and on the ground --> Project Thread '55 F100, just a roller at the moment, new project Silver MY12 Volkswagen Amarok |
||
|
|
|
|
27-04-2007, 12:21 PM
|
#12 | |||
|
OLD SKOOL BABY
Join Date: Apr 2005
Location: Melbourne
Posts: 1,688
|
Quote:
 
__________________
XB Sedan - Trick Mansweto built 351 3V Alloy Headed Cleveland,Demon Carby ontop of CHI Hi Rise Manifold - 600HP 83 F100 XLT - 351 Cleveland C6 Auto wrapped in Black snake skin vinyl, daily tow rig. 1976 XB GS COUPE (waiting to start the rebuild)
|
|||
|
|
|
|
27-04-2007, 07:10 PM
|
#13 | |||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Posts: 556
|
Quote:
|
|||
|
|
|
|
27-04-2007, 07:21 PM
|
#14 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
Those gauges on the passenger side of the dash look bloody awful!!!
__________________
RAM 1500
|
||
|
|
|
|
27-04-2007, 08:22 PM
|
#15 | ||
|
CRE.87V
Join Date: Jan 2006
Location: Newcastle
Posts: 388
|
only need 4 clips cost me 9 bucks on trade from ford....the whole cover is like 57 on trade....there is a bit of space behind it but it looks crap so u would have to mod it to make a storage space
|
||
|
|
|
Interior Trim Question
Linear Mode
