Ford Falcon BA-FG Coilovers - Page 7

graphicgoose · 15-09-2014, 08:01 PM

Quote:

Originally Posted by marcyeo

Great writeup Goose. Would you say on full soft the Shockworks are still softer a ride than the Teins would be? I've been thinking of getting a set of these, or some Bilsteins with H&R springs.

Shockworks only problem is they don't have anyone in Brisbane yet to install these, otherwise would have gotten a set long ago..

I find them more enjoyable than my Teins were, in that they feel like they work with the chassis better...unless you have them on full hard, then they're not pleasant on the road haha. I've only done a quick test on fully soft and it was comfortable. Might be stretching a little bit to compare the same exact setting on my Teins but I can tell you that even driving around on 3 front and 4 rear isn't uncomfortable for a daily and is great if you feel the need to throw it through some corners. Body roll is no longer an issue. These things keep surprising me and get better and better the more I drive with them.

Also, doesn't matter that they don't have someone in QLD to fit them mate. Ask around on here and other forums to get some insight into a good suspension workshop in your area and then speak to Brett. In my case I went to a shop he hadn't dealt with before, so Brett gave them a call to talk about the install and some things they like done during fitting. Brett had a positive experience dealing with the workshop and so did I (Brett, I'll email you with a proper write up/impressions soon I promise).

dl86 · 16-09-2014, 11:50 PM

Quote:

Originally Posted by graphicgoose

unless you have them on full hard, then they're not pleasant on the road haha.

I have my fronts cranked up to the highest settings and rears at 3 clicks up from soft and don't find it uncomfortable at all. Just handles super sharp.

But then again my rims weigh nothing compared to the stockers and I'm running 18" rubber with a larger profile.

kanos.79 · 07-10-2014, 03:10 PM

well just got the GTE booked in . 8 days and counting . Cant wait .

neasfox9 · 06-04-2015, 03:49 PM

Is there any news on a Brisbane installer? I will ordering my coilovers in the next 6 months and would prefer somebody familiar with the product to install them.

JC · 06-04-2015, 06:06 PM

Quote:

Originally Posted by neasfox9

Is there any news on a Brisbane installer? I will ordering my coilovers in the next 6 months and would prefer somebody familiar with the product to install them.

My understanding is that they come preset from shockworks, and therefore installation is no different to removing front struts and putting them back in - rear is even easier. You only need an 18mm socket, 17mm socket, 18mm ring spanner, 21mm ring spanner, and an 8mm spanner and you have all the tools you need to remove/install front and rear.

neasfox9 · 06-04-2015, 08:22 PM

Quote:

Originally Posted by JC

My understanding is that they come preset from shockworks, and therefore installation is no different to removing front struts and putting them back in - rear is even easier. You only need an 18mm socket, 17mm socket, 18mm ring spanner, 21mm ring spanner, and an 8mm spanner and you have all the tools you need to remove/install front and rear.

Oh ok cheers for the feedback. Never dealt with suspension before. Sounds like I could nearly do it haha

marcyeo · 06-04-2015, 11:17 PM

Quote:

Originally Posted by neasfox9

Is there any news on a Brisbane installer? I will ordering my coilovers in the next 6 months and would prefer somebody familiar with the product to install them.

Brett recommended Ken from Accurate Suspension in Woodridge. Did a good job with the install, just mind that he's the only person in the workshop so give him good notice and will require an afternoon to install.

Shockworks · 07-04-2015, 09:48 AM

Quote:

Originally Posted by marcyeo

Brett recommended Ken from Accurate Suspension in Woodridge. Did a good job with the install, just mind that he's the only person in the workshop so give him good notice and will require an afternoon to install.

Thanks Marcyeo,
Ken does a good job at Accurate suspensions:-)
Cheers
Brett

Ford17 · 25-07-2016, 10:37 AM

Quote:

Originally Posted by neasfox9

Is there any news on a Brisbane installer? I will ordering my coilovers in the next 6 months and would prefer somebody familiar with the product to install them.

Quote:

Originally Posted by marcyeo

Brett recommended Ken from Accurate Suspension in Woodridge. Did a good job with the install, just mind that he's the only person in the workshop so give him good notice and will require an afternoon to install.

Just checking on Brisbane installers - would Accurate Suspension still be the best option?

Shockworks · 25-07-2016, 12:38 PM

Quote:

Originally Posted by Ford17

Just checking on Brisbane installers - would Accurate Suspension still be the best option?

Yeah Ken at accurate suspensions does a great job:-)

Cheers

Ford17 · 29-07-2016, 10:18 PM

Quote:

Originally Posted by marcyeo

Brett recommended Ken from Accurate Suspension in Woodridge. Did a good job with the install, just mind that he's the only person in the workshop so give him good notice and will require an afternoon to install.

Shockworks getting installed there next week in my FGX-Xr8; trust all will be okay.

FPV523 · 12-08-2016, 12:40 AM

Can the standard ride height be maintained?

I have a FG MKII FPV F6 and don't want to lower it but just to handle a bit better.

I also have a whiteline front and rear sway bar kit with adjustable link pins to put in

I6DOHC · 04-11-2016, 11:22 AM

Quote:

Originally Posted by Ford17

Shockworks getting installed there next week in my FGX-Xr8; trust all will be okay.

Hey Ford17 - I am really interested to hear about your thoughts on the FGX-XR8 after you have fitted the shockworks setup. Am contemplating what to do myself with my XR8 as the standard setup is just far too harsh to live with day to day (am looking for a more compliant ride as a daily).

Shockworks sounds like on the full soft they should provide a better ride (more along the lines of a Grand Tourer) but can be wound up on a needs basis for a more engaging drive as and when required.

There are a lot of great reports I've read for BA's/FG's etc, and would expect the same for the FGX-XR8 but would be nice to hear from someone that has fitted them first hand.

Buttnekid · 16-09-2014, 04:41 PM

Brett

Can you please send me a PM with pricing for a set for my new GTF? I am in Perth.

Can you please set them up for firmish street driving. Car will be mainly street driven, might see the occasional drags and even more occasional twisty track work. I should add that I will be running 20 x 8.5, 245's on the front and 20x10.5, 275's on the rear.

Do you sell/recommend any other suspension parts - bushes/sway bars etc?

thanks in advance

Simon

Buttnekid · 22-10-2014, 05:54 PM

Can I just say that I have become increasingly disillusioned with customer service (or the non-existence of it) in Australia over the past decade..... until today. I would like to give a massive massive acknowledgment to both Brett at Shockworks and Tom at Malaga Suspension Centre.

They have gone above and beyond to set up my GTF. Restored some faith in the service industry in Australia!!!

I cannot recommend these two businesses highly enough to anyone wanting coilovers or suspension work done in WA.

Thanks guys!

shaine71 · 25-11-2014, 08:35 PM

What height are you guys running on the rear with these shockworks coilovers?

Shockworks · 26-11-2014, 11:01 AM

Quote:

Originally Posted by shaine71

What height are you guys running on the rear with these shockworks coilovers?

Hi,
We like to run the car around the 355mm from hub to guard. we find this to be better height for normal daily driving and better for driveways. We also find it a good compromise between the ride and handling.

Cheers
Brett

shaine71 · 25-11-2014, 10:34 PM

mine is at 350mm bottom of guard/ centre of hub and that is as low as it will go, does that sound right?

see photo below.

Shockworks · 26-11-2014, 11:04 AM

Quote:

Originally Posted by shaine71

mine is at 350mm bottom of guard/ centre of hub and that is as low as it will go, does that sound right?

see photo below.

We do restrict how low the car does go our it just sits on the bumper and kicks off over most bumps. If you like you can remove the lock nut and screw the spring seat to the end of the thread and lock it tight which will give you another 10-12mm.
Cheers
Brett

tradesecret · 22-02-2019, 04:39 PM

best place for shockworks coilovers in brissie? fg gt sedan

Shockworks · 27-02-2019, 12:11 PM

Quote:

Originally Posted by tradesecret

best place for shockworks coilovers in brissie? fg gt sedan

Hey Tradesecret,
I am sorry for the late reply.

You can go to Royal Auto Styling in Narangba, who do a great job with the Ford installs.

I hope this helps:-)
Cheers
Brett

shaine71 · 25-11-2014, 10:35 PM

shaine71 · 26-11-2014, 11:50 AM

Thanks Brett, I am happy with were its sitting now,you had it set at 350 front and 357 rear, so I just took the back down 7mm.
I was just making sure they were sitting in there right place.Lee did say he rang you so I thought everything would be ok.
I havnt had much of a drive yet, but they feel really good. I will get a wheel alighnment tomorrow and go for a good drive on the weekend.
Cheers Shaine.

egoxr6 · 25-02-2015, 11:40 PM

Envy

old_mate · 18-05-2015, 11:27 PM

I just bought a set of these 2nd hand - having had XYZ's for the last couple of years bolting these in is just something else again.

Don't get me wrong, for the $1200 i paid for the XYZ's they have done a decent job in the last couple of years but this Shockworks setup is definitely worth the extra coin. The car feels a lot more compliant; the rough roads around here are insanely different to drive on (not bad considering I have 30 profile tyres on 20in rims); the car is a lot nicer on turn in; less tendency to understeer - it's simply become an absolute pleasure to drive.

wish i had bought them new. I've been missing out!

MR_FG_09 · 29-05-2015, 09:33 PM

is there anyone on the gold coast you would recommend for fitting Brett?

geobar · 04-02-2016, 11:21 AM

Hey Brett,

You PM box is full... Just checking if stock has arrived for the FGX Coilovers?

George

Shockworks · 04-02-2016, 11:26 AM

Quote:

Originally Posted by geobar

Hey Brett,

You PM box is full... Just checking if stock has arrived for the FGX Coilovers?

George

Hi George,

Sorry about that and just fixed my inbox!!

We will have stock arriving at the start of next week so will let you know as soon as they arrive mate:-)

Cheers
Brett

pyrex · 15-02-2016, 06:50 PM

Hi Brett, is the FG ute suspension still priced at $1700 ?

Shockworks · 16-02-2016, 01:01 PM

Quote:

Originally Posted by pyrex

Hi Brett, is the FG ute suspension still priced at $1700 ?

Hey Pyrex,
I am sorry but the Ford ute adjustable kit is now $2000. We held on to the original price until September last year. We had to make the increase on the price due to our Aussie dollar falling so far in the last two years.
Best regards
Brett