Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 24-06-2005, 09:15 PM   #31
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

yes I am sure useles is a real mean traffic light racer who is all about 0-100k max.

This is where the lack of low down torque hurts the genIII the most.

Once wound up it will pull away obviously.
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 24-06-2005, 10:02 PM   #32
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,083
Default

Even 0-100 on an equal run the Gen3 will have me for sure. They are not rockets off the line but neither is an auto Falcon.
My cars no slug but I'm also well aware of its limitations. The Gen3 is a fast car, simple as that.
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 24-06-2005, 10:12 PM   #33
stockstandard
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 1,381
Default

I have lined up against a gen III at the drags and all I can say is that it would take a hell of an I6 to beat them 0-100 or down the 1/4
__________________
Quote:
Originally Posted by casper
Yeah, the car is ugly, I can live with that.
stockstandard is offline   Reply With Quote Multi-Quote with this Post
Old 24-06-2005, 10:18 PM   #34
V8 Ghia
Formally ED I6
 
V8 Ghia's Avatar
 
Join Date: Jan 2005
Location: Vic
Posts: 367
Default

Quote:
Originally Posted by stockstandard
I have lined up against a gen III at the drags and all I can say is that it would take a hell of an I6 to beat them 0-100 or down the 1/4
I've beaten a couple down the 1/4, but lost to about a dozen others :gren:
__________________
Daily driver
98' AU 349ci Fairmont Ghia on LPG

---------------------------
Other
93' ED 5spd 4.0L NA Fairmont
13.75 @ 101mph
V8 Ghia is offline   Reply With Quote Multi-Quote with this Post
Old 24-06-2005, 10:33 PM   #35
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

On the street Casper...that is what I am talking about. The gen 3 cars are not as quick as I thought they would be on the street. It is really horses for courses. A modified gen 3 may beat me at these speeds.I dont really know. But what I do know that the cam setup and cam timing has alot to do when peak torque is produced.

In the specified settings I would not beat a gen 3. Now with the cam a tad advanced and the unichip low to mid power =very good.Maybe not a 1/4 mile killer but a good street car...which is where I spend most of my time.Actually around 800 km per week here in Sydney for work.So I get an idea...and yep sure probably you are much quicker than me down the quarter..I dont know...but for me a 1/4 mile on the street just doesnt happen.It is about peoples likes and dislikes..thats all.

Some like circuit racing ..some like 1/4 mile..me I like a good street car for every day....
Maybe a legal 1/4 mile run with gtech will let you all know that I am not that quick?Maybe will ...??? Ill just have to wait for the right opportunity .?
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 27-06-2005, 04:46 AM   #36
FPVWEPN
Team Urinal Cake Racing
 
FPVWEPN's Avatar
 
Join Date: Jan 2005
Posts: 1,075
Default

any gen 3 will beat you at those speeds simple as that.
chances are the ones you thought you were dragging from the lights werent actually trying
FPVWEPN is offline   Reply With Quote Multi-Quote with this Post
Old 27-06-2005, 07:15 AM   #37
stockstandard
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 1,381
Default

OK - time for some numbers. I just signed up on LS1.COM.AU, navigated my way to the timeslip database and found the SLOWEST gen3 up there and compared it to mine.

In a hypathetical drag between myself and this gen 3:
CAR - RWKW - 60’ - 1/8 - ¼ ET & MPH
VY 2 SS ute - 191.1 - 2.450 - 9.721 - 14.822@95.84
EF Sedan - 146.2 - 2.220 - 9.512 - 14.843@91.34

On other runs I had better MPH, but that was my fastest ET by a few 1/100ths. So as sad as it is on my best run I cant beat the slowest gen III down the 1/4 :

If you dont care about 1/4 mile time, look at the 1/8 which is more of an indication of on-road performance. I managed to get my 3.08 open wheeler to hook up surprisingly well that pass with a 2.2 60'. With my lucky launch I managed to pull 2 tenths on the gen 3 which I held to the 1/8 mile at which time I was doing a touch under 120kph. Given that my car does 0-100 in 6.1s, and Useless gets his to 100 in about 7 flat (very respectable time there for the wagon), it is pretty clear that any gen 3 that either of us beat either isnt trying very hard or had a very bad run.

...and thats just the slowest gen3 in the database :
__________________
Quote:
Originally Posted by casper
Yeah, the car is ugly, I can live with that.
stockstandard is offline   Reply With Quote Multi-Quote with this Post
Old 27-06-2005, 08:13 PM   #38
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

I agree the falcon auto is no traffic light racer but in mine which only does 2.36 for the 60' and 10 sec at 71 for the eighth I have not been embarrased by V8 gen III wagons and Statesmans. Not beaten them either and wouldn't but they are not driving past me like a BA XR8 auto or an HSV Clubsport does.
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 27-06-2005, 08:47 PM   #39
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by FPVWEPN
any gen 3 will beat you at those speeds simple as that.
chances are the ones you thought you were dragging from the lights werent actually trying
On Sunday..at the lights a monaro came up next to me on the left while in front of me was the right of way.In front of him was parked cars.Who did he think he was ? So I fanged it ,he fanged the crap out of it head to head near to the parked cars and I slammed on the brakes to not smash this moron!!It had some fancy number plates like me5.7l??

This guys face showed astonishment!!Now if he wasnt trying I will sell my AU tommorow and buy a bicycle.!!!



Iknow people find it hard to believe that the wagon is running very well on the street ..but its not my fault people have installed impressive dyno day cars with bigger cams than mine and retarded heaps killing their low down power!!..
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 27-06-2005, 09:06 PM   #40
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

Hey useless I have got an old malvern star you can have mate
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 27-06-2005, 09:23 PM   #41
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Hey does it have 3.7 gears??
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 27-06-2005, 09:30 PM   #42
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Useless thinks a 1/4 mile is in order soon..somehow
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 28-06-2005, 03:15 PM   #43
loxxr6
XB in parts...
 
loxxr6's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
Default

Quote:
Useless thinks a 1/4 mile is in order soon..somehow
Yep. Join me, Jonbays and whoever else at the next v8 owners track day.
__________________


Daily Driver 2019 Ford Escape...looking for XR6T's.


loxxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 13-07-2005, 02:14 AM   #44
bradley02
Guest
 
Posts: n/a
Default

how much is it
  Reply With Quote Multi-Quote with this Post
Old 13-07-2005, 09:43 AM   #45
loxxr6
XB in parts...
 
loxxr6's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
Default

Off the top off my head I think it's $190 or so ?

Check out www.v8owners.com.au
__________________


Daily Driver 2019 Ford Escape...looking for XR6T's.


loxxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 18-07-2005, 10:26 PM   #46
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by Brenden
Yes go the stall, however like they all say, KNOWING YOUR BLOODY LUCK ! Its up to you fella.
Have you got one for my AU in stock?

I would like to get one in the coming weeks.

Also I am sorry for my doubts on your products.
I have been fooled into believing dyno numbers which are nothing short of crap....

I think that dyno dynamics should pull their finger out and have a standard calibration across the country for all of their dynos ,the variances give no true indication or consistency of power.Great for each workshop to tune ..and great for the ls1 guys to brag but who cant pull away from me in a 0-100 run!!!

The dev 4 flies Brendan..it friggin flies mate. I hope people learn from my mistakes and just go buy a gtech and time their vehicle for true performance gains.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 19-07-2005, 02:31 PM   #47
MustangNicko
FF.Com.Au Hardcore
 
MustangNicko's Avatar
 
Join Date: Dec 2004
Location: Geelong
Posts: 1,094
Default

The DEV4 doesnt need H/D springs does it?
MustangNicko is offline   Reply With Quote Multi-Quote with this Post
Old 19-07-2005, 05:52 PM   #48
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

For a daily driven family/work car it is not necessary.They do advise the springs if you rev it many times.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 20-07-2005, 11:00 PM   #49
FPVWEPN
Team Urinal Cake Racing
 
FPVWEPN's Avatar
 
Join Date: Jan 2005
Posts: 1,075
Default

gtech is crap get over it man
FPVWEPN is offline   Reply With Quote Multi-Quote with this Post
Old 20-07-2005, 11:11 PM   #50
Chris
AFF.com.au
 
Join Date: Dec 2004
Posts: 2,128
Default

Quote:
Originally Posted by useless
Have you got one for my AU in stock?

I would like to get one in the coming weeks.

Also I am sorry for my doubts on your products.
I have been fooled into believing dyno numbers which are nothing short of crap....

I think that dyno dynamics should pull their finger out and have a standard calibration across the country for all of their dynos ,the variances give no true indication or consistency of power.Great for each workshop to tune ..and great for the ls1 guys to brag but who cant pull away from me in a 0-100 run!!!

The dev 4 flies Brendan..it friggin flies mate. I hope people learn from my mistakes and just go buy a gtech and time their vehicle for true performance gains.
The Gen 3 statement is a big one. There is not a Gen 3 alive that wouldn't wax your car over the first 100.
Chris is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2005, 07:04 PM   #51
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by Chris
The Gen 3 statement is a big one. There is not a Gen 3 alive that wouldn't wax your car over the first 100.
The Gen 3 statement is based on a few upset gen 3 drivers on the streets of Sydney and 1 brand new monaro owner. I have never found an ss commy that can pull away from me at street legal speeds. No big deal ..if one does beat me I wil post it up.

Yes I did get beaten by a monaro a month ago but that is the only one that I remember.Many monaros are way overated.

Yes a mini s did pass me ...but not by much.That car is underrated and would smoke ss commies no probs.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2005, 08:13 PM   #52
V8 Ghia
Formally ED I6
 
V8 Ghia's Avatar
 
Join Date: Jan 2005
Location: Vic
Posts: 367
Default

I'll back up useless and say the dev4 can beat an unmodified ls1
__________________
Daily driver
98' AU 349ci Fairmont Ghia on LPG

---------------------------
Other
93' ED 5spd 4.0L NA Fairmont
13.75 @ 101mph
V8 Ghia is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2005, 09:04 PM   #53
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

Quote:
Originally Posted by Chris
The Gen 3 statement is a big one. There is not a Gen 3 alive that wouldn't wax your car over the first 100.
I agree the genIII pulls away real HARD when it revs out in second and third.

They do lack torque though 460NM sounds good but its up high at 4400rpm.

So on the street 0-60 -100k you could get close.

for instance look at these numbers:
0-60kmh 100Kmh
VY V6 S Auto 3.4 7.6
VY V8 Auto 3.6 7.3
BA V8 Auto 3.5 7.4
BA XR6 AutoS 3.9 8.1
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2005, 11:13 PM   #54
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by jonbays
I agree the genIII pulls away real HARD when it revs out in second and third.

They do lack torque though 460NM sounds good but its up high at 4400rpm.

So on the street 0-60 -100k you could get close.

for instance look at these numbers:
0-60kmh 100Kmh
VY V6 S Auto 3.4 7.6
VY V8 Auto 3.6 7.3
BA V8 Auto 3.5 7.4
BA XR6 AutoS 3.9 8.1

Thats it JonBays ..I am getting around 7.1 7.4 0-100 times at the moment so it starts to add up why ..
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 22-07-2005, 06:35 PM   #55
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Well I ran a pb0-100 kmph today of 6.54 second 0-100.Now I must work out how to drop 1 more second.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 23-07-2005, 06:02 PM   #56
FPVWEPN
Team Urinal Cake Racing
 
FPVWEPN's Avatar
 
Join Date: Jan 2005
Posts: 1,075
Default

i think you need more $$$$$$$
FPVWEPN is offline   Reply With Quote Multi-Quote with this Post
Old 23-07-2005, 06:26 PM   #57
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Yes ..my next last 800 dollars should see me close to it with some luck.That and some tuning
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 24-07-2005, 02:42 AM   #58
au-steve
fully *** turboooo
 
au-steve's Avatar
 
Join Date: Dec 2004
Location: Eastern Suburbs, Melbourne
Posts: 523
Default

Quote:
Yes a mini s did pass me ... but not by much.That car is underrated and would smoke ss commies no probs.
Now this is just getting rediculous, like Chris said, GEN3's are fast, you cant beat them, and neither can a mini s. Hell, i know i get pasted by SS's all the time and i dont hide it, im proud to be in a country that builds them, so one day i will buy one its just one of those things. Upset monaro guy was probably upset coz he may of had to change down from 3th after peacefully pulling off the lights ... and meets you. Menacing up beside him, and clearly not allowing him to merge safly from the parked cars infront of him.

does no one else see something wrong here????!!!
Quote:
Originally Posted by useless
at the lights a monaro came up next to me on the left while in front of me was the right of way.In front of him was parked cars.Who did he think he was ? So I fanged it ,he fanged the crap out of it head to head near to the parked cars and I slammed on the brakes to not smash this moron!!
__________________
AU1 Forte
178.6rwkw @ 5 psi
Highflowed T03, Intercooled
Full comp insurance :nutsycuck

Last edited by au-steve; 24-07-2005 at 02:49 AM.
au-steve is offline   Reply With Quote Multi-Quote with this Post
Old 24-07-2005, 07:03 AM   #59
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,083
Default

Quote:
Originally Posted by au-steve
Now this is just getting rediculous, like Chris said, GEN3's are fast, you cant beat them, and neither can a mini s. Hell, i know i get pasted by SS's all the time and i dont hide it, im proud to be in a country that builds them, so one day i will buy one its just one of those things. Upset monaro guy was probably upset coz he may of had to change down from 3th after peacefully pulling off the lights ... and meets you. Menacing up beside him, and clearly not allowing him to merge safly from the parked cars infront of him.

does no one else see something wrong here????!!!
Well, I know how fast my car is and I know that, given the right launch I can hold a gen3 till 80kph before it starts climbing alll over me in a serious way.
Head to head to 100kph....I'm toast. No ifs, buts or maybe's.

Basically if Useless can beat them to 100kph then they have slower Gen3's in NSW or his wagon is quicker then my Sedan. Simple as that really.
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 24-07-2005, 09:49 AM   #60
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by ED I6
I'll back up useless and say the dev4 can beat an unmodified ls1

Well this might explain it .

The mini supercharged will beat an ss commy 0-100.If you live on the roads like myself doing some 1000 km per week,you start to see the truth.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 10:37 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL