Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 12-07-2013, 12:33 PM   #1
Tripper
Regular Member
 
Join Date: May 2012
Location: Perth WA
Posts: 36
Default Gt shaker clearance with MSD dizzy

Hi I'm looking to put a GT shaker on my 351 clevo but don't have any specs on the shaker housing. I have a MSD ready to run 8350 dizzy and I'm not sure if there is enough room. Ha any one done this before or does any one have any measurements of the speaker assembly?? Thanks

Tripper is offline   Reply With Quote Multi-Quote with this Post
Old 12-07-2013, 01:48 PM   #2
OBW351
Regular Member
 
OBW351's Avatar
 
Join Date: Jun 2010
Posts: 195
Default Re: Gt shaker clearance with MSD dizzy

i had a msd billet dizzy in my clevo and i know it flowed on the shaker assembly so as mine was nothing special ( flibreglass jobby, Metal base) i just took a hammer to it before i painted it. The msd's sit higher than a standard dizzy. Hope this helps
__________________
XY Fairmont GS 12.94 @ 104.5 Daily Driver

351clevo no longer, in comes 428ci svo block with trickflow heads, hogans sheet manifold and 1050 carb, 760hp at flywheel, bring on big skids


FOR SALE:Moroso sump to suit SVO/Dart block pm for details

FOR SALE:Brand new Dart block 9.2 deck 4.125 boreSold
OBW351 is offline   Reply With Quote Multi-Quote with this Post
Old 12-07-2013, 02:20 PM   #3
Tripper
Regular Member
 
Join Date: May 2012
Location: Perth WA
Posts: 36
Default Re: Gt shaker clearance with MSD dizzy

Yeah that helps heaps. How much room is there to dent out so that the air cleaner still sits in its location? If its fiberglass it will have to be a cut and mold job hey? Thanks mate
Tripper is offline   Reply With Quote Multi-Quote with this Post
Old 12-07-2013, 02:42 PM   #4
OBW351
Regular Member
 
OBW351's Avatar
 
Join Date: Jun 2010
Posts: 195
Default Re: Gt shaker clearance with MSD dizzy

can't remember exactly how much i had to dint it in. wasn't a great deal but also only had a small cap dizzy. large dizzy wouldn't be nice to work with. if your base is glass it would be a cut and repair job, but mine was metal base so i just gave it a little panel beat.
__________________
XY Fairmont GS 12.94 @ 104.5 Daily Driver

351clevo no longer, in comes 428ci svo block with trickflow heads, hogans sheet manifold and 1050 carb, 760hp at flywheel, bring on big skids


FOR SALE:Moroso sump to suit SVO/Dart block pm for details

FOR SALE:Brand new Dart block 9.2 deck 4.125 boreSold
OBW351 is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 03:25 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL