|
|
|
|
|
30-08-2016, 02:26 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2008
Posts: 1,422
|
What car cover can all ya'll recommend?
I had a really expensive weatherproof one with breathers etc... but found it a pain to put on the car due to its heavy weight, and also the elastic edges where the corners are gathered put small scratches on the clear coat when putting on and pulling off. My car is always garaged now so doesn't need to be waterproofed, so I'm looking for something really soft and lightweight to just keep the dust off. I'm yet to find anything decent in your usual car shops like Supercheap, Auto One, Repco etc... So I'm thinking maybe something online. Any recommendations would be great. Cheers!
__________________
2011 SILHOUETTE FPV GS 315 #0275 20x10", 20x8.5" Lenso D1R's Pedders XA Coilovers Brembo 4/1 Pacemaker 1" 7/8 Headers Twin 3" Stainless Manta Catback XFT Built Motor XFT Custom Surge Tank XFT Stage 3 ZF Final Drive Chromoly Tailshaft KPM Twin Air Filter KPM Stage 2 Intercooler KPM Twin Throttle Body 2.6L Kenne Bell on E85 BlueStreak Circle D Converter 900+ rwhp thanks to Xtreme Ford Tuning |
||
|
|
|
30-08-2016, 02:54 PM
|
#2 | ||
|
Call me dirt... Joe Dirt
Join Date: May 2009
Location: Back in Perth for good
Posts: 5,302
|
If you want the absolute best car cover and are prepared to pay for it, then get yourself a Chief Car Cover.
They are tailor made for each car and are even made right here in WA. My mate has one for his concours 68 HK Monaro and it is the softest fabric you'll get.
__________________
2007 BFII FPV Cobra Ute|Boss 302|6M|#23/100 Mods so far: Billet Products Shifter|X-Force Exhaust|Herrod Oil Breathers|Whiteline Sway Bar|Tein SuperStreets|Kings FOR-303SL Rear Springs|Melling Oil Pump|Mace Manifold Spacers|Powerbond Underdrives|Pacemaker Headers|Ballistic Cats|XFT Custom Tune @ 308.3rwkw|DBA T3 Rotors|Ferodo Pads|Goodridge Braided Lines Mods to come: 4.11 Diff Gears|Chromoly Tailshaft I use & recommend: Castrol|Motorcraft|Mainlube|Penrite Check Out My Build Thread |
||
|
|
|
|
30-08-2016, 09:46 PM
|
#4 | |||
|
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,755
 
|
Quote:
http://www.covercraft-pacificshop.co...FYaVvAod8SIL8g |
|||
|
|
|
|
31-08-2016, 10:09 AM
|
#5 | ||
|
The good, bad and fugly
 
Join Date: Feb 2016
Posts: 1,978
|
I have a very lightweight cover which is made from quite thin material similar to a parachute because my XR is mostly in the garage these days so like the OP, just wanted to keep the dust off. Its a Coverall branded product. I bought the extra large size.
Pros I found it at Supercheap for around $44. Easy to fit comes with attached carry bag Cons Needed to cut a small hole for the antenna No openings for door access like some expensive brands have Not for long term outdoor use due to its thin material and no inner lining to stop rubbing in windy conditions
__________________
Time was on my side! |
||
|
|
|
|
31-08-2016, 03:51 PM
|
#6 | ||
|
Regular Member
Join Date: Jun 2009
Posts: 494
|
Supercheap also have a show car one for indoor use only
It is red and very soft on the car side. I have 2 of them for my special girls and they are brilliant - cost around $60 when on special
__________________
1940 Ford Deluxe Hotrod 1956 Ford Mainline 1958 Ford Customline 2002 Ford Explorer I only drive V8's |
||
|
|
|
|
31-08-2016, 08:11 PM
|
#8 | ||
|
BA/F6 BF/F6 SSV/R TTG
Join Date: Mar 2007
Location: Perth
Posts: 7,251
|
__________________
BA BF FPV starter button repairs. PM me. Nizpro equipped and Tuned by the BEST in the west Xtreme Ford Tuning 479RwKw Fuel limited, more pumps and power too come. F6#0507 & #0639 Pro racer and Tech expert NIZPRO modifying falcons like Premcar can only dream of , see VIDEO below. https://youtu.be/oa4IfguGQ-A |
||
|
|
|
|
01-09-2016, 03:41 PM
|
#9 | ||
|
Mopar! But Own F6's..
Join Date: Dec 2005
Location: F6DELAIDE
Posts: 3,221
|
+1 for Covercraft.. I got mine cheap(er) than rrp coz everyone wants black, I didnt mind the blue. Sorry pics taken with old phone..
 
__________________
F6 TYPHOON FPV 335 GT |
||
|
|
|
|
01-09-2016, 03:43 PM
|
#10 | ||
|
Workshop & Performance
 
Join Date: Jan 2005
Location: Hewett SA
Posts: 4,143
|
Covercraft 'fit' is smack on...you can get similar materials for less but fit and finish is work the bucks IMHO (though mines an outdoor)
__________________
When close is good enough and the 6 MPS in the driveway has FoMoCo written all over the place. Xr5 for sale shortly...just not a hatch guy |
||
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Best Car Cover?
Linear Mode
