Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 23-01-2009, 12:42 PM   #1
HARMFUL 81
Regular Member
 
Join Date: Oct 2005
Posts: 43
Default bottom end power

What are the options to increasing the bottom end power/torque for a standard I6 wagon. It seems to be struggling a bit under load lately (family plus trailer up hills) Thinking maybe a checklist first then possible mods.

HARMFUL 81 is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2009, 12:46 PM   #2
HARMFUL 81
Regular Member
 
Join Date: Oct 2005
Posts: 43
Default

I should add, when it hits 2.5-3k it hits some sort of power band and gets up and boogies - is there something obvious restricting bottom end performance?
HARMFUL 81 is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2009, 01:25 PM   #3
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

2800rpm stall converter. Youll need a tranny cooler as well. Well worth it.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2009, 01:48 PM   #4
Mr Hardware
Flairs - Truckers Delight
 
Mr Hardware's Avatar
 
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
Tech Writer: Recognition for the technical writers of AFF - Issue reason: The excellent how to on LPG jet cleaning. 
Default

uh, i wouldnt recommend a 2800rpm stall converter on a family wagon.
make sure your car is fully serviced - oil/oil filter/air filter/fuel filter/plugs/leads/perhaps clean injectors/trans service/diff service etc
should be the quickest and cheapest way to return to some better power.
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon"
Mr Hardware is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2009, 01:53 PM   #5
HARMFUL 81
Regular Member
 
Join Date: Oct 2005
Posts: 43
Default

out of the list provided the only things that havent been done recently are the air filter, fuel filter leads and diff service. I was thinking of doing the fuel and air filters soon.
HARMFUL 81 is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2009, 02:18 PM   #6
glennb
Regular Member
 
Join Date: Aug 2008
Posts: 77
Default

if its an auto they are pretty gutless down low. Best thing would chuck a 3.45 diff in the rear or a 3.7 . I have an au xr6 and still find it could have better low down power. Im thinking a 3.7 but for a family wagon and trouble free with still excellent fuel economy go the 3.45 it should be enough for your needs.
glennb is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2009, 02:21 PM   #7
HARMFUL 81
Regular Member
 
Join Date: Oct 2005
Posts: 43
Default

im not too sure on the ratio it has in there. It has an LSD, one that im not too ready to part withfor the sake of a bit more power.i was hoping there would be some relatively easy mod to give more bottom end.
HARMFUL 81 is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2009, 02:22 PM   #8
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

Why not a stall for a family wagon? You want a bit of go, its either that or diff gears.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2009, 03:23 PM   #9
Whoosha
AU DIE HARD
Donating Member1
 
Whoosha's Avatar
 
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For all the things you do behind the scenes. Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

What other Mods does it have ?
If its stock why not go with the standard Zorst.Cai,& Tune.
__________________

........Age and treachery will ALWAYS overcome youth and skill.......


CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd


.............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES...
..................................................

Quote:
Originally Posted by Riksta
Quote of the weekend: "The quarter mile wasn't as long as I expected it to be".
Whoosha is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2009, 10:50 PM   #10
private9
www.TUFFCARPARTS.com
 
private9's Avatar
 
Join Date: Feb 2006
Posts: 5,221
Default

They're very sluggish off the mark, so sounds pretty normal there.

As has been mentioned an exhaust will liven it up a little.

Either shorter diff gears, or a stally will wake it up off the line.

I wouldn't worry about driveability with a stally under 3k. As long as it retains lock up it'll still driver nicely.

Might help with suggestions from people if you post up a budget and what sort of mods you'd put up with!
private9 is offline   Reply With Quote Multi-Quote with this Post
Old 24-01-2009, 09:04 AM   #11
Sox
RIP...
 
Sox's Avatar
 
Join Date: Dec 2004
Posts: 15,524
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: As recommended by Ropcher. Personifies the spirit of AFF. 
Default

If you're wanting more power for towing up hills when loaded etc, then I would look at extractors and a 2.5" sports exhaust.

The next step would be to change the rear end gearing, those autos are notorious for being sluggish down low and it's mainly to do with the very tall 1st gear and large gap between 1st and 2nd.

Swapping diff gears for 3.45 or even 3.7 would help response down low and shrink the gap between 1st and 2nd.
This will be at the expense of relaxed cruising ability on the highway though.

The usual cheap stuff would also be a good idea, like larger intake snorkel blah blah blah. This is probably not as critical though as you're not chasing upper RPM power, so ultimate flow is essential.
What you want is to optimise is low RPM ability and gearing IMO.

Lastly you could look at changing the cam to perhaps an XR6 cam, or at least advancing yours with a vernier gear.

I would not recommend a high stall converter.

EDIT - Also, make sure the BBM manifold is operating correct, in that the valve is actually switching over to the long runners below 3800rpm.
From memory the default is stay in short runners if there is a vacuum fault. This will kill power below 3800rpm.
__________________
.
Oval Everywhere...
Sox is offline   Reply With Quote Multi-Quote with this Post
Old 17-03-2009, 11:25 PM   #12
EBIIBurner
Regular Member
 
EBIIBurner's Avatar
 
Join Date: Jun 2005
Location: Brisbane
Posts: 155
Default

i read in my manual that the ba and bf falcons have something called a
Broadband Vacuem motor, it says that it restricts the throttle from opening to 100% until the car reaches 3800rpm, does anyone know if you can over ride that, i suppose that might be one of the things a flash tuner does. It would also explain why with my EB the wheels would spin easy on a slight incline but with the ba no chance
EBIIBurner is offline   Reply With Quote Multi-Quote with this Post
Old 18-03-2009, 02:18 AM   #13
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default

Quote:
Originally Posted by EBIIBurner
i read in my manual that the ba and bf falcons have something called a
Broadband Vacuem motor, it says that it restricts the throttle from opening to 100% until the car reaches 3800rpm, does anyone know if you can over ride that, i suppose that might be one of the things a flash tuner does. It would also explain why with my EB the wheels would spin easy on a slight incline but with the ba no chance
i would imagine compared to your EB the B series would have a fair weight penalty.
mik is offline   Reply With Quote Multi-Quote with this Post
Old 18-03-2009, 10:55 PM   #14
EBIIBurner
Regular Member
 
EBIIBurner's Avatar
 
Join Date: Jun 2005
Location: Brisbane
Posts: 155
Default

Quote:
Originally Posted by mik
i would imagine compared to your EB the B series would have a fair weight penalty.
that would be a contrbuting factor but it will still be good if you could by pass that Broadband Actuator thing that would give a little more bottom end
EBIIBurner is offline   Reply With Quote Multi-Quote with this Post
Old 19-03-2009, 01:02 AM   #15
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,701
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by HARMFUL 81
I should add, when it hits 2.5-3k it hits some sort of power band and gets up and boogies - is there something obvious restricting bottom end performance?
The symptoms described fit a blocked cat almost perfectly - only thing missing is heat. Easy way to check for that is once the car is up to running temperature, stop the car and let it idle, and check the heat of the exhaust gasses at the tailpipe - they should be warm only; if they're very hot, then your cat is more than likely very stuffed.

This is exactly what happened to my old EL - doughey up to 2500rpm, so I replaced the cat based on mechanics advice (thinking there's no way it would work), and it magically freed up all that hidden power!
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 19-03-2009, 09:13 AM   #16
Sox
RIP...
 
Sox's Avatar
 
Join Date: Dec 2004
Posts: 15,524
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: As recommended by Ropcher. Personifies the spirit of AFF. 
Default

Quote:
Originally Posted by EBIIBurner
i read in my manual that the ba and bf falcons have something called a
Broadband Vacuem motor, it says that it restricts the throttle from opening to 100% until the car reaches 3800rpm, does anyone know if you can over ride that, i suppose that might be one of the things a flash tuner does. It would also explain why with my EB the wheels would spin easy on a slight incline but with the ba no chance
It doesn't work like that.

The BBM (broadband manifold) is a fancy dual runner inlet manifold.
One set of runners is a certain (long) length to optimise low and midrange power, and then there is a second set of runners half (short) the length of the 1st set, to optimise top end power. There is a set of butterflies within the manifold which controls the seperate runners. This butterfly is controlled by a solenoid operated vacuum device. The solenoid receives a signal from the ECU to operate at 3800rpm.

So no, disabling the long runners below 3800rpm won't help bottom end power, in fact it will lose around 40nm.

The BBM is a very clever design, basically it's having your cake and eating it.
It's hard to improve it, until you're up over 180rwkw.
__________________
.
Oval Everywhere...
Sox is offline   Reply With Quote Multi-Quote with this Post
Old 19-03-2009, 07:11 PM   #17
onfire
FF.Com.Au Hardcore
 
onfire's Avatar
 
Join Date: Feb 2006
Posts: 1,078
Default

Get a decent complete service done first, if you havnt had one recently. I had one yesterday, and it feels alot healthier right across the board. If its not a significant enough improvement, atleast you'll know the car is running at its best when you decide on what you're doing with it.
onfire is offline   Reply With Quote Multi-Quote with this Post
Old 19-03-2009, 11:23 PM   #18
EBIIBurner
Regular Member
 
EBIIBurner's Avatar
 
Join Date: Jun 2005
Location: Brisbane
Posts: 155
Default

Quote:
Originally Posted by Sox
It doesn't work like that.

The BBM (broadband manifold) is a fancy dual runner inlet manifold.
One set of runners is a certain (long) length to optimise low and midrange power, and then there is a second set of runners half (short) the length of the 1st set, to optimise top end power. There is a set of butterflies within the manifold which controls the seperate runners. This butterfly is controlled by a solenoid operated vacuum device. The solenoid receives a signal from the ECU to operate at 3800rpm.

So no, disabling the long runners below 3800rpm won't help bottom end power, in fact it will lose around 40nm.

The BBM is a very clever design, basically it's having your cake and eating it.
It's hard to improve it, until you're up over 180rwkw.
thats definetly put it into perspective now i get it cheers (The manual should go into more detail about some stuff)
EBIIBurner is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 12:01 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL