|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
09-07-2013, 04:47 PM | #31 | ||
Petro-sexual
Join Date: Dec 2004
Location: Melbourne
Posts: 4,527
|
I don't know the ins and outs of road design, but when it comes to designing lifting equipment there is a 'design load', and a 'working load'. The design load is always higher than the working load.
|
||
This user likes this post: |
09-07-2013, 05:21 PM | #32 | |||
XY Falcon
Join Date: Oct 2011
Posts: 413
|
Quote:
But that is beside the point, I was just explaining that engineers include safety/service factors in their design calculations; I'm not actually getting into a debate about speed limits, cameras and revenue.
__________________
_________________ 1971 XY Falcon 500 |
|||
09-07-2013, 07:04 PM | #34 | |||
FF.Com.Au Hardcore
Join Date: Jan 2006
Posts: 1,119
|
Quote:
This is the track we in Australia is taking where other countries are ripping out cameras. Apparently we accept cameras so the next step will be GPS monitoring which has already been floated to cut off your engine if you exceed the limit too much... |
|||
09-07-2013, 08:12 PM | #35 | ||
Workshop & Performance
Join Date: Jan 2005
Location: Hewett SA
Posts: 4,143
|
And this thread is heading for the same fate as so many others.....
We all have differing opinions and views. Sometimes we can just agree that variety is what makes life interesting.
__________________
When close is good enough and the 6 MPS in the driveway has FoMoCo written all over the place. Xr5 for sale shortly...just not a hatch guy |
||
This user likes this post: |
09-07-2013, 08:52 PM | #36 | ||
BANNED
Join Date: Jul 2012
Posts: 2,886
|
Certain types of cameras are not immune to certain car "accessories"
http://disinfo.com/2013/01/a-diy-hat...ras-and-video/ |
||
09-07-2013, 09:11 PM | #37 | ||
Half brain dead already
Join Date: Oct 2011
Location: South Aus
Posts: 3,080
|
How accurate are these cameras? E.g, if it were set to 110 between points, and you were doing 112, would you get done? Or are there tolerances?
__________________
"My Shockwave Baby" Running tuned at 191.3rwkw with 475nm Torque Pacemaker PH4490 + Hiflo Pacemaker cat/catpipe + Xforce 2.5' catback into dual pipes after Diff. FG Manifold + Herrod airbox + 20% underdrive +Hi flow thermostat + 26mm radiator and Weapon X coils! Now rolling on staggered Matte black Lesnso D1R's NOW MANUAL! Shockwave Blue!
More to come Now the proud owner of a '97 NL Fairlane |
||
09-07-2013, 10:00 PM | #38 | ||
Starter Motor
Join Date: Oct 2011
Posts: 11
|
The $afety cameras at Crafers and near Keith are only for trucks. The new cameras at at Ki Ki and Coonalpyn are for cars as well. $afety for everyone!!
|
||
09-07-2013, 11:42 PM | #39 | ||
Regular Member
Join Date: May 2011
Location: Adelaide
Posts: 222
|
|
||