|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-05-2025, 10:42 AM
|
#1 | ||
|
Starter Motor
Join Date: May 2025
Posts: 1
|
Hello, I just recently purchased a JDM 1994 Ford Festiva SZ with the 1.5L 4 Speed Automatic. The hold light is flashing so I started diagnosing. The pcm code was 55 for pulse generator. The pulse generator resistance checks 344 ohm in spec. I went to check the ecu pinouts for resistance, but I am unsure which pins to test on the harness. I can’t find anything on it in the states. Could someone help me with some pinouts or diagrams? Any help would be appreciated. Thanks!
|
||
|
|
1994 Ford Festiva SZ JDM PCM Pinout
Linear Mode
